FarSync H-Series - X.25 Cards for Windows NT |
|||||||||||||
The FarSync PCI H-Series adapters has been developed to provide high performance X.25 communications for PCs running Windows NT. See the FarSync T-Series for X.25 support on Windows XP, 2000 and NT |
|||||||||||||
APIs for Application Development TCP/IP over X25 Communications Cards High Performance Software Configuration Cables Packaging and Warranty Technical Specifications |
|||||||||||||
APIs for Application Development | |||||||||||||
Application developers will find that the FarSync range has a very flexible API, it allows access to the low level features of X.25 whilst also enabling fast easy development.
|
|||||||||||||
TCP/IP over X.25 | |||||||||||||
The IP/X25 module supplied on the CD-ROM as part of the standard
product enables PCs to run the IP protocol over an X.25 network. Higher
level protocols that run over IP including TCP, UDP, HTTP and FTP are handled.
The module conforms to RFC 1356 to permit interoperation with other
devices using IP over X.25. |
|||||||||||||
Communications Cards | |||||||||||||
There are 2 cards in the FarSync PCI H-Series range, both are half-length cards for easy installation. The complete range support X.21 (V.11), V.24 (RS232C) and V.35 type port connections | |||||||||||||
FarSync H2P | FarSync H4P | ||||||||||||
The FarSync H2P is a 2 port card; port connector types (X.21 / V.24 / V.35) are automatically configured on connection through intelligent cable sensing. | The FarSync H4P is a high density 4 port adapter with intelligent cable sensing. The 4 ports are brought out the back of the card via a high density connector, only one bus slot is required. A short 4 way splitter cable supplied with the card connects to the high density connector, the standard cables which are ordered separately are connected to the splitter cable. Up to 4 adapters can be installed in a single PC. | ||||||||||||
High Performance | |||||||||||||
The FarSync PCI product range has been designed for high performance
whilst offering a full set of X.25 features. |
|||||||||||||
Software Configuration | |||||||||||||
The FarSync product is simple to install on Windows
NT. Configuration is via a user friendly application designed to make X.25
configuration easy. There is context sensitive help and an on-line manual
should it be required. Many of the parameters such as DTE / DCE selection
are determined automatically. Selecting the line speed by default automatically
sets suitable timer and retry values. The advanced tab permits users to
exactly specify the configuration of the line where this is required.
A monitor utility is included which displays the channel connection status
and maintains statistics of user data, packet and frame types transmitted. |
|||||||||||||
Cables | |||||||||||||
Cables are available for the adapters with X.21 (V.11 15 pin male D type), V.24 (RS232C 25 pin male D type) and V.35 (MRAC-34 male 'brick' type), connections in any mix up to the cards total port count. | |||||||||||||
Packaging and Warranty | |||||||||||||
The X.25 software and the development kit are supplied on the CD-ROM
included with the FarSync communications card. |
|||||||||||||