home > networking > x.21 cards
home | site map | contact us


FarSync T-Series X.21 Cards

X.21 synchronous adapters for PCs running Linux, Windows XP, 2000 and NT

FarSync X21 T-Series

Product Range
Cables
Linux specification
Windows XP, 2000 and NT specification

Overview:
The versatile FarSync X21 T-Series cards provide X.21 and V.35 WAN solutions of up to 8.448 Mbits/s (E2) speeds. Whether you are connecting to the Internet, a satellite link, a private network using TCP/IP, IPX or inter-connecting sites using leased lines, FarSync provides the connectivity solution. The cards install seamlessly under Linux, Windows 2000, Windows NT 4.0 and now Windows XP. Multiple cards are supported, providing a very low cost high speed Wide Area Network (WAN) hub.

Key Features:
Data rates of over 2000 frames per second
Cards offering 1-2 ports and 4 port options
Line speeds to 8.448 Mbits/s per port (including E1 and E2 lines)
X.21 (V.11 / RS422), V.35 and RS232C (V.24 / X21bis) interfaces
Drivers support multiple card and multiple processor installations
Intelligent short cards with PCI bus interfaces
See Linux for features supported
See Windows NT, 2000 and XP for features supported
G.703 BNC and RJ45 connections supported with interface converters

   
Contact us for further information  
 
FarSync X21 T-Series Product Range
Product Name Description Code
FarSync X21 T2P 2 port card, dual x.21 cable, software drivers for Linux, Windows 2000, NT and XP FS8210
FarSync X21 T4P 4 port card, quad x.21 cable, software drivers for Linux, Windows 2000, NT and XP FS8410
FarSync WAN T2P 2 port card with software drivers for Linux, Windows 2000, NT and XP (no cable) FS8211
FarSync WAN T4P 4 port card with software drivers for Linux, Windows 2000, NT and XP (no cable) FS8411
     

Cables
Product Name Description Code
MCX1 Single X.21 (V.11) cable with male 15 pin D type connector, 1 metre XP8924
EX2X Dual X.21 (V.11) cable with male 15 pin D type connectors, 1.5 metres (this cable is supplied with FS8210) XP8926
HSSV Single V.35 cable with standard MRAC-34 (brick) male connector, 1.5 metres XP8927
MCV2 Dual V.35 cable with standard MRAC-34 (brick) male connectors, 1.5 metres XP8928
MCX4 Quad X.21 (V.11) cable with male 15 pin D type connectors, 1.5 metres (this cable is supplied with FS8410) FS6041
MCV4 Quad V.35 cable with standard MRAC-34 (brick) male connectors, 1.5 metres FS6042
MCX2 Dual port cable, 1 RS232C (V.24) port (male 25 pin D type connector) and 1 X.21 (V.11) port (male 15 pin D type connector), 1.5 metres XP8921
MCR2 Dual RS232C (V.24) cable with male 25 pin D type connectors, 1.5 metres XP8922
MCR1 Single RS232C (V.24) cable with male 25 pin D type connector, 1 metre XP8923
MCR4 Quad RS232C (V.24) cable with male 25 pin D type connectors, 1.5 metres FS6043